LTD20

Monitoring TES loop gain in frequency-domain multiplexed readout

Tijmen de Haan (Institute of Particle and Nuclear Studies (IPNS), High Energy Accelerator Research Organization (KEK), Japan, International Center for Quantum-field Measurement Systems for Studies of the Universe and Particles (QUP), High Energy Accelerator Research Organization (KEK), Japan)

Characterization of a TDM test-bed towards the new X-IFU FPA-DM: status update and future outlook

Davide Vaccaro (NWO-I/SRON Netherlands Institute for Space Research, The Netherlands)

Development of time division multiplexing technique for HUBS

Bo Gao (Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, China)

Crosstalk effects in microwave SQUID multiplexed TES bolometer readout

John Groh (University of Colorado, Boulder, USA)

End-to-end modeling of the TDM readout system for CMB-S4

David Goldfinger (SLAC, USA, Stanford University, USA)

Advances in time-division SQUID multiplexing for TES arrays

Malcolm Durkin (University of Colorado, USA)

Time division SQUID multiplexing chips for future observatories

Malcolm Durkin (University of Colorado, USA)

Demonstration of a fast modulated microwave SQUID multiplexer readout of optical transition edge sensors

Ryota Hayakawa (National Institute of Advanced Industrial Science and Technology (AIST), Japan, International Center for Quantum-field Measurement Systems for Studies of the Universe and Particles (QUP), Japan)

Demonstration of optical TES readout with a tunable nonlinear kinetic inductance-based current sensor

Paul Szypryt (National Institute of Standards and Technology, USA, University of Colorado Boulder, USA)

Flux-ramp modulated dc-SQUID readout with high dynamic range and intrinsic frequency-domain multiplexing capability

Daniel Hengstler (KIP, Heidelberg University, Germany)

Astronomy ReadouT (ART) Data Acquisition And Control Software Based On B/S Architecture

Xiaohui Yan (National Astronomical Observatories, Chinese Academy of Sciences, China, University of Chinese Academy of Sciences, China)

Fabrication and characterization of boron-implanted silicon superconducting thin films on SOI substrates for low temperature detectors

Abdelkader ALIANE (Univ. Grenoble Alpes, CEA, LETI, France)

Quasiparticle recombination in MKIDs made of disordered superconductors

Steven de Rooij (SRON - Netherlands Institute for Space Research, The Netherlands, Delft University of Technology, The Netherlands)

Indium bump bonding application and advanced fabrication techniques for low-temperature detectors and readout

Tammy Lucas (National Institute of Standards and Technology, USA)

Advances in fabrication of large-scale magnetic micro-calorimeter arrays

Archana Devasia (NASA Goddard Space Flight Center, USA)

Robust and repeatable fabrication process of large-format detector arrays for the Simons Observatory

Shannon Duff (National Institute of Standards and Technology, USA, The Simons Observatory Collaboration, USA)

Studies of silicon-rich silicon nitride grown via Ion beam assisted sputtering as a low-loss dielectric for mm-wave MKIDs

Clarence Chang (Argonne National Laboratry, USA, University of Chicago, USA)

Tuning the superconducting transition temperature of co-sputtered iridium and platinum films

Gensheng Wang (Argonne National Laboratory, USA)

Study on dielectric constant and loss of HfO₂ prepared by atomic layer deposition

Yuman Wang (Institute of High Energy Physics, Chinese Academy of Sciences, China, Spallation Neutron Source Science Center, China))

Improving fabrication process for metallic magnetic calorimeters (MMC)

Jiwan Song (Korea Research Institute of Standards and Science, Korea, Kyungpook National University, Korea)

Microwave loss of silicon nitride and silicon-rich silicon nitride

Jiamin Sun (Shandong Institute of Advanced Technology, China, Shandong University, China)

Thermal annealing of aluminum manganese transition edge sensors for optimization in cosmic microwave background experiment

Benjamin Westbrook (University of California, Berkeley, USA)

Fabrication of a large scale anti-coincidence detector using transition edge sensors

James Chervenak (NASA GSFC, USA)

Lessons learnt from fabrication of first 0.1 million µmux channels

Robinjeet Singh (National Institute of Standards and Technology, USA)

Fabrication of transition-edge-sensors (TES) for the BICEP-Array polarimeter experiment

Alexis Weber (Jet Propulsion Laboratory, USA)

Fabrication and characterization of AlMn superconducting films for the search of 0νββ decay

Zhouhui Liu (The Institute of High Energy Physics of the Chinese Academy of Sciences, China)

Fabrication process control to realize high yield, uniform, repeatable low frequency detector arrays for the LiteBIRD CMB experiment

Christopher Raum (University of California, Berkeley, USA)

Thermalization of a SQUID chip at cold: thermal conductance measurement for GE 7031 varnish glue, Apiezon N grease and rubber cement between 20 mK and 200 mK

Matteo D'Andrea (INAF/IAPS Roma, Italy)

Novel transition-edge sensor microcalorimeter detectors for the 511-CAM pointed gamma-ray mission

Sohee Chun (Washington University in St. Louis, USA)

The CUORE-CUPID cryostat: current performance and future upgrades

Shihong Fu (Fudan University, China, Laboratori Nazionali del Gran Sasso - INFN, Italy)

Cryogenic infrastructure of the NUCLEUS experiment

Alexander Wex (Technical University of Munich, Germany)

A cryogenic testbed for polarization modulators and cryogenic mechanisms

Fabio Columbro (Sapienza, University of Rome, Italy, INFN Roma1, Italy)

Recent developments for the terahertz photon counting system

Hajime Ezawa (National Astronomical Observatory of Japan, Japan, The Graduate University for Advanced Studies, SOKENDAI, Japan)

A vibration decoupling system for TES operation in the COSINUS dry dilution refrigerator

Moritz Kellermann (Max Planck Institute for Physics, Germany)

Concept design of a 6-m class space chamber for the cryogenic testing of LiteBIRD low-frequency telescope

Taketo Nagasaki (High Energy Accelerator Research Organization, IPNS, Japan)

Cryogenic performance of the second micro-x sounding rocket flight

Joshua Fuhrman (Northwestern University, USA, NASAS Goddard Space Flight Center, USA)

Cryogenic performance of the MISTRAL instrument

Alessandro Coppolecchia (Sapienza Università di Roma, Italy, Istituto Nazionale di Fisica Nucleare, Italy)

Temperature controls using an MMC thermometer

Kyung-Rae Woo (Institute for Basic Science, Korea, University of Science and Technology, Korea)

Development and optical evaluation of achromatic half-wave plate for the Simons Observatory

Junna Sugiyama (University of Tokyo, Japan)

Development of fast modulated radiator for responsivity and time constant calibration

Yudai Seino (Princeton University, USA, Kyoto University, Japan)

Development of the half-scaled reflector of the LiteBIRD low-frequency telescope

Shugo Oguri (Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, Japan)

DESHIMA 2.0: Full system evaluation of the ultra-wideband integrated superconducting spectrometer in laboratory

K. Karatsu (SRON - Netherlands Institute of Space Research, The Netherlands)

DESHIMA 2.0: Alignment strategies for wideband sub-mm integrated superconducting spectrometers

Arend Moerman (Delft University of Technology, The Netherlands)

DESHIMA 2.0: data processing and quick-look monitor

Tatsuya Takekoshi (Kitami Institute of Technology, Japan)

A tunable blackbody polarized infrared source for the BBOP camera

Xavier-Francois NAVICK (CEA, Institut de Recherche sur les Lois Fondamentales de l’Univers, Université Paris-Saclay, France)

Flat low loss silicon lens with 3-layer antireflection structures for millimeter and submillimeter wavelengths

Fabien Defrance (Jet Propulsion Laboratory, California Institute of Technology, USA)

Continuity test to the large detector array with the flying prober

Wonsik Yoon (NASA Goddard Space Flight Center, USA, Science Systems and Applications Inc., USA)

Relative sensitivity dependence for design of sapphire-based broadband half-wave plate with anti-reflective sub-wavelength structures in LiteBIRD

Ryota Takaku (Kavli Institute for the Physics and Mathematics of the Universe, Japan))

The future CRAB facility: Precise calibration of nuclear recoils in the 100 eV range for cryogenic experiments

Raimund Strauss (Technical University of Munich (TUM), Germany)

Development of microwave microstripline flexible cables for low-temperature detectors

Tai Oshima (National Astronomical Observatory of Japan, Japan)

Monolithic kilopixel silicon microlens arrays for future far-infrared observatories

Nicholas Cothard (NASA Goddard Space Flight Center, USA)

Study of vibrations on testing system of cryogenic particle detectors

Mingxuan Xue (University of Science and Technology of China, China)

Optical design and optimization of space high-cadence observing terahertz-telescope (SHOT)

Mingzhu Zhang (Zhejiang Laboratory, China)

Quasi-optical system design for terahertz imaging telescope

Mingzhu Zhang (Zhejiang Laboratory, China)

RFSoC gen3-based software-defined radio characterization for the readout system of low-temperature bolometers

Manuel Elías García Redondo (Instituto de Tecnologías en Detección y Astropartículas (ITeDA), Argentina, Karlsruhe Institute of Technology (KIT), Germany, Universidad Nacional de San Martín (UNSAM), Argentina, Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Argentina, Universidad Tecnológica Nacional (UTN), Argentina)

The magnetic microbolometer read out chain: a proposal for QUBIC

Manuel Platino (Instituto de Tecnologías en Detección y Astropartículas (ITeDA), Argentina, Comisión Nacional de Energía Atómica (CNEA), Argentina, Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Argentina, Universidad Nacional de San Martín (UNSAM), Argentina)

Goertzel filter bank channelizer for cryogenic sensors read-out

Luciano Pablo Ferreyro (Instituto de Tecnologías en Detección y Astropartículas (ITeDA), Argentina, Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Argentina, Universidad Nacional de San Martín (UNSAM), Argentina, Universidad Tecnológica Nacional (UTN), Argentina, Karlsruhe Institute for Technology (KIT), Germany)

Readout system for magnetic microbolometers

Daniel Alejandro Almela (Instituto de Tecnologías en Detección y Astropartículas (ITeDA), Argentina, Comisión Nacional de Energía Atómica (CNEA), Argentina, Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Argentina, Universidad Tecnológica Nacional (UTN), Argentina)

Fabrication of Nb/Al-AlOx/Nb Josephson tunnel junctions for cryogenic detector readout

Mathias Wegner (Institute for Data Processing and Electronics (IPE), Karlsruhe Institute of Technology (KIT), Germany)

Study and mitigation of noise in cryogenic bolometer readout circuit

Vishal Vatsa (Homi Bhabha National Institute, India, INO, Tata Institute of Fundamental Research, India)

IF and direct RF measurement results of RFSoC FPGA based systems

Douglas Bennett (National Institute of Standards and Technology, USA)

The SQUID control unit for the LiteBIRD space mission: description, functional tests and early performance assessment

Giulia Conenna (University of Milano Bicocca, Italy, INFN Milano Bicocca, Italy)

Thermal kinetic inductance detector (TKIDs) camera deployment: readout and engineering of a pathfinder CMB polarimeter

Lorenzo Minutolo (California Institute of Technology, USA)

Understanding the phase of responsivity and noise sources in frequency-domain multiplexed readout of transition edge sensor bolometers

Nicole Farias (University of California Berkeley, USA)

Impedance matching between SQUID and warm amplifier for TES readout. Good or bad idea?

Manuel Gonzalez (Astroparticule et Cosmologie, France)

Design and test of a modular readout electronic for kinetic inductance detectors for the COSMO experiment

Giulia Conenna (University of Milano Bicocca, Italy, INFN Milano Bicocca, Italy)

Space-flight compatible transition-edge sensor readout electronics for the line emission mapper (LEM) mission

Kazuhiro Sakai (NASA Goddard Space Flight Center, USA)

Conceptual design and analysis of a cryogenic front-end ASIC for TES readout using ST-130 nm BiCMOS technology

Damien PRELE (APC CNRS/Paris Cité University, France)

SLAC microresonator radio frequency electronics for thermal kinetic inductance detectors

Zoe Smith (Stanford University, USA, Kavli Institute for Particle Astrophysics and Cosmology, USA)

Integrated two-stage SQUID-chip with 6 nH input impedance for the AMoRE project

Daniel Hengstler (KIP, Heidelberg University, Germany)

A clipping algorithm for generating TES bias waveform

Ruirui Fan (National Astronomical Observatories, Chinese Academy of Sciences, China)

An FPGA-based firmware for superconducting detector arrays readout

Xiaojing Wu (National Astronomical Observatories, Chinese Academy of Sciences, China)

RFSoC based heterogeneous readout hardware platform for MKIDs and TES readout

Xiaoyun Ma (National Astronomical Observatories, Chinese Academy of Sciences, China)

The impact of passivation layer thickness on heat dissipation in cryogenic electronics

Babak Mohammadian (University of Manchester, UK)

Evaluation of current dependence of kinetic-inductance in NbTiN thin film for kinetic-inductance traveling-wave parametric amplifiers

Hiroki Kutsuma (Tohoku University, Japan, RIKEN Center for Quantum Computing (RQC), Japan)

Low noise parametric amplification in DARTWARS

Marco Faverzani (University of Milano, Italy, INFN Milano, Italy, Bicocca Quantum Technologies (BiQuTe) Centre, Italy)

High-performing segmented cooling fins for low-sub-kelvin SQUIDs

Stephen Boyd (University of New Mexico, USA)

Methods for extending the scanning frequency range of flux-driven Josephson parametric amplifiers designed for axion search experiments

Minsu Ko (KAIST, Korea, Center for Axion and Precision Physics Research, Institute for Basic Science, Korea

Improving readout of superconducting resonators using kinetic inductance traveling wave amplifiers

Michael Vissers (National Institute of Standards and Technology, USA)

Two-stage cryogenic HEMT amplifiers for low temperature detectors

Ivar Rydstrom (Santa Clara University, USA)

A detector-agnostic data acquisition system for small-scale physics experiments

Samuel Watkins (Los Alamos National Laboratory, USA)

DAQ system R&D for TES X-ray spectrometer at SHINE

Jingkai Xia (ShanghaiTech University, China)

The data acquisition system for phase-III of the BeEST experiment

Connor Bray (Lawrence Livermore National Laboratory, USA, Colorado School of Mines, USA)

An optimization technique for readout of superconducting detectors

Liaoyuan Liu (National Astronomical Observatory of China/UCAS, China)